Products
C67300
Dynalloy Bronze Alloy
Previously known as Dynalloy, this alloy is corrosion-resistant and has high strength. It is known to be an excellent bearing against hardened surfaces. Dynalloy is typically used where greater ductility is required. This alloy is used against soft or hard mating members and it can be soldered. MUELLER Alloy 6730 is a medium-leaded copper-base alloy with good machinability. It can be used with hard or soft mating members where moderate strength is sufficient.
Chemistry
| Cu | Pb | Fe | Zn | P | As | Sn | Al | Mn | Ni | Si | Others |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 58.0 - 63.0 | 0.4 - 3.0 | 0.5 MAX | REM | NA | NA | 0.3 MAX | 0.25 MAX | 2.0 - 3.5 | 0.25 MAX | 0.5 - 1.5 | NA |
Shapes & Sizes
| Rounds | Hex | Square | Octagon | Rectangle | Special Shapes |
|---|---|---|---|---|---|
| 0.375" to 4.000" | Consult Mill | Consult Mill | Consult Mill | Consult Mill | Consult Mill |
Minimal Mechanical Tolerances
| Tensile Strength (KSI) | Yield Strength (KSI) | Elongation % | Rockwell B Hardness |
|---|---|---|---|
| 65 | 40 | 0.08 | 72 |
Tolerances (Rounds)
| .0250" to 0.375" | 0.375" to 0.500" | 0.500" to 1.000" | 1.000" to 2.000" | 2.000" to 2.500" | 2.500" to 3.000" | 3.000" to 3.500" | 3.500" to 4.000" |
|---|---|---|---|---|---|---|---|
| +/-0.003 | +/-0.003 | +/-0.003 | +/-0.004 | +/-0.004 | +/-0.005 | +/-0.006 | NA |
Tolerances (Hex)
| .0250" to 0.375" | 0.375" to 0.500" | 0.500" to 1.000" | 1.000" to 2.000" | 2.000" to 2.500" | 2.500" to 3.000" | 3.000" to 3.500" | 3.500" to 4.000" |
|---|---|---|---|---|---|---|---|
| D/NA | D/NA | D/NA | D/NA | D/NA | D/NA | D/NA | D/NA |
Machinability
| Lathe Speed | Lathe Feed | Lathe Back Rack Angle | Lathe Clearance Angle | Drill Speed | Drill Feed | Drill Back Rack Angle | Drill Clearance Angle | Milling Cutters Speed | Milling Cutters Feed | Milling Cutters Back Rack Angle | Milling Cutters Clearance Angle | Form Tools Speed | Form Tools Feed | Form Tools Back Rack Angle | Form Tools Clearance Angle | Taps Speed | Tap Feed | Tap Back Rack Angle | Tap Clearance Angle |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 250 ~ 400 | 0.005 ~ 0.030 | 4 ~ 8 | NA | 75 ~ 250 | 0.003 ~ 0.020 | Full Rake Angle | NA | 150 ~ 250 | 0.500 ~ 20.000 | 0 ~ 10 | NA | NA | 0.001 ~ 0.003 | 5 ~ 10 | NA | 50 ~ 90 | NA | 5 ~ 8 | NA |
Specifications. Equal.
| Option 1 | Option 2 | Option 3 | Option 4 | Option 5 | Option 6 | Option 7 |
|---|---|---|---|---|---|---|
| UNS Alloy C67300 | SAE J463 | DYNALLOY |
Workability
| Cold Working Capacity | Thread Rolling | Cold Heading | Hot Working Capacity | Machinability Rating |
|---|---|---|---|---|
| Good | NA | Good | Excellent | NA |
Applications / Markets
| Transportation | Plumbing | Defense | Refrigeration | Medical | Industrial | Builder's Hardware | Architecture | Marine |
|---|---|---|---|---|---|---|---|---|
| Speed Reducer Gears, Bushings, Gears, Valve Guides | Bearings, Pins, Bushings, Drive Shafts, Gears and Cams, Piston Heads, Propeller Shafts, Spindles, Fasteners, Lead Screw Nuts | Hardware, Valve Seats |